Epson DS-570WII

❏ Windows 7
Click the start button, and then select All Programs > Epson
Soware
> EPSON
Soware
Updater.
Starting on Mac OS
Select Go > Applications > Epson Soware > EPSON Soware Updater.
Application for
Conguring
Scanner Operations (Web
Cong
)
Web Cong is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or
smart device. You can
conrm
the scanner status or change the network service and scanner settings. To use the
Web
Cong
, connect the scanner and the computer or device to the same network.
e following browsers are supported.
Microso Edge, Internet Explorer 8 or later, Firefox
*
, Chrome
*
, Safari
*
*Use the latest version.
Running Web
Cong
on a Web Browser
1.
Launch a Web browser from a computer or smart device, and then enter the scanner's IP address.
Format:
IPv4: http://the scanner's IP address/
IPv6: http://[the scanner's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
❏ Since the scanner uses a self-signed certicate when accessing HTTPS, a warning is displayed on the browser when
you start Web
Cong
; this does not indicate a problem and can be safely ignored.
❏ If the administrator password has not been set when accessing Web
Cong
, you need to set a user name and
password.
c
Important:
Do not forget the user name and the password. If you forget them, you will need to contact Epson service
support.
2.
If you want to change the scanner settings, you need to login as an administrator.
Click Administrator Login at the top-right of the screen. Enter the User Name and Current password, and
then click OK.
Note:
If Administrator Logout is displayed at the top-right of the screen, you have already logged-on as an administrator.
Related Information
& “Checking the Scanner's IP Address” on page 68
Scanner Basics > Information on Applications > Application for Conguring Scanner Operations (Web Cong)
26