Epson DS-570WII

Running Web Cong on Windows
When connecting a computer to the scanner using WSD, follow the steps below to run Web Cong.
1.
Open the scanner list on the computer.
❏ Windows 10
Click on the start button, and then select Windows System > Control Panel > View devices and printers
in Hardware and Sound.
❏ Windows 8.1/Windows 8
Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound (or
Hardware).
❏ Windows 7
Click the start button, and select Control Panel > View devices and printers in Hardware and Sound.
2.
Right-click on your scanner and select Properties.
3.
Select the Web Ser vice tab and click the URL.
Since the scanner uses a self-signed certicate when accessing HTTPS, a warning is displayed on the browser
when you start Web
Cong
; this does not indicate a problem and can be safely ignored.
Note:
If the administrator password has not been set when accessing Web Cong, you need to set a user name and password.
c
Important:
Do not forget the user name and the password. If you forget them, you will need to contact Epson service
support.
Application for Setting up the Device on a Network (EpsonNet
Cong)
EpsonNet
Cong
is an application that allows you to set the network interface addresses and protocols. See the
operations guide for EpsonNet
Cong
or the application's help for more details.
Starting on Windows
❏ Windows 10
Click the start button, and then select EpsonNet > EpsonNet Cong.
❏ Windows 8.1/Windows 8
Enter the application name in the search charm, and then select the displayed icon.
❏ Windows 7/Windows Vista/Windows XP
Click the start button, and select All Programs or Programs > EpsonNet > EpsonNet
Cong
SE > EpsonNet
Cong.
Starting on Mac OS
Go > Applications > Epson Soware > EpsonNet > EpsonNet Cong SE > EpsonNet Cong.
Scanner Basics > Information on Applications > Application for Setting up the Device on a Network (EpsonNet Con …
27