EasyManua.ls Logo

Epson DS-570WII

Epson DS-570WII
243 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Items Settings and Explanation
Secure Connection Specify the secure connection method for the email server.
None
If you select POP before SMTP in Authentication Method,
the connection method is set to None.
SSL/TLS
This is available when Authentication Method is set to O
or SMTP AUTH.
STARTTLS
This is available when Authentication Method is set to O
or SMTP AUTH.
Certicate Validation
The certicate is validated when this is enabled. We recommend this is set to Enable.
POP3 Server Address
If you select POP before SMTP as the Authentication Method, enter the POP3 server
address between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN
format.
POP3 Server Port Number
If you select POP before SMTP as the Authentication Method, enter a number between 1
and 65535.
Checking a Mail Server Connection
You can check the connection to the mail server by performing the connection check.
1.
Access Web Cong and select the Network tab > Email Server > Connection Test.
2.
Select Start.
e connection test to the mail server is started. Aer the test, the check report is displayed.
Mail Server Connection Test References
Messages Cause
Connection test was successful. This message appears when the connection with the server is successful.
SMTP server communication error.
Check the following. - Network
Settings
This message appears when
The scanner is not connected to a network
SMTP server is down
Network connection is disconnected while communicating
Received incomplete data
POP3 server communication error.
Check the following. - Network
Settings
This message appears when
The scanner is not connected to a network
POP3 server is down
Network connection is disconnected while communicating
Received incomplete data
An error occurred while connecting to
SMTP server. Check the followings. -
SMTP Server Address - DNS Server
This message appears when
Connecting to a DNS server failed
Name resolution for an SMTP server failed
Administrator Information
>
Monitoring a Remote Scanner
>
Receiving Email Notications When Events Occur
192

Table of Contents

Related product manuals