Size Card Type Thickness Loading Capacity Loading Direction
ISO7810 ID-1 Type
54.0×85.6 mm
(2.1×3.3 in.)
With embossing 1.24 mm (0.05 in.) or
less
1 card Horizontal (Landscape)
Without embossing 0.76 mm (0.03 in.) to
1.1 mm (0.04 in)
*
5 cards
Less than 0.76 mm
(0.03 in.)
5 cards
* You can scan these cards only when the resolution is 300 dpi or less, and disabling Slow mode.
Placing Plastic Cards
1.
Open the input tray, and then slide out the output tray and raise the stopper.
2.
Slide the edge guides on the input tray all the way out.
Specications of Originals and Placing Originals
>
Placing Originals
>
Plastic Cards
44
To Next Page
Loading...
