Epson DS-570WII

4.
Slide the edge guides to
t
the edge of the plastic cards.
Note:
To scan plastic cards, set the appropriate setting in the Epson Scan 2 window.
When you are using Document Capture Pro, you can open the Epson Scan 2 window by pressing the Detailed Settings
button on the Scan Settings screen.
Select Plastic Card in Document Size or select O in Detect Double Feed on the Main Settings tab in Epson Scan 2.
See the Epson Scan 2 help for details.
If you forget to disable Detect Double Feed in Epson Scan 2 and a double feed error occurs, remove the card from the
ADF and then reload it, press the
(Double Feed Detection Skip) button on the scanner as shown below to disable
Detect Double Feed for the next scan, and then scan again. e
(Double Feed Detection Skip) button only disables
Detect Double Feed for one sheet.
Related Information
& “Required Settings for Special Originals in Epson Scan 2 Window” on page 87
Specications of Originals and Placing Originals > Placing Originals > Plastic Cards
46