When you start EasyMP Network Projection and select a connection mode,
one of the following screens is displayed depending on the connection
mode you selected.
• When selecting Quick Connection Mode
• When selecting Advanced Connection Mode
A
Automatic search
In Quick Connection Mode, searches for the pro-
jectors based on the SSID.
In Advanced Conncection Mode, searches for the
available projectors on the network system to which
the computer is connected.
B
Manual search
In Quick Connection Mode, searches for the pro-
jector by using the SSID.
In Advanced Connection Mode, searches for the
projector by using an IP address or a projector
name.
C
Status Indicates the status for detected projectors as shown
below.
Search and Connect Screen
63
To Next Page
Loading...
