b
While projecting, press the [ ] or [ ] button.
Stopping Slideshow
To close Slideshow, disconnect the USB device from the USB port on the
projector. For digital cameras, hard disks, and so on, turn off the power to
the device and then remove.
Projecting the selected image
Attention
Do not disconnect the USB storage device while it is being accessed. An error
may occur in Slideshow.
a
Start Slideshow.
The file list screen is displayed.
s "Starting Slideshow" p.46
b
Press the [ ], [ ], [ ], and [ ] buttons to select the
image file you want to project.
c
Press the [Enter] button.
The image is displayed.
a
Press the [ ][ ] buttons to move to the next or previous
image file.
d
Press the [Esc] button to return to the file list screen.
Projection Functions
48
To Next Page
Loading...
Need help?
General
