When the Indicators Provide No Help
If any of the following problems occur and the indicators do not offer a
solution, refer to the pages given for each problem.
Problems Relating to Images
• No images appear
Projection does not start, the projection area is completely black,
or the projection area is completely blue.
sp.92
• Moving images are not displayed
Moving images being projected from a computer appear black
and nothing is projected.
sp.93
• Projection stops automatically sp.93
• The message "Not supported" is displayed sp.93
• The message "No Signal" is displayed sp.93
• Interference or distortion appear in images sp.95
• The image is truncated (large) or small, or the aspect ratio is not
suitable
Only part of the image is displayed, or the height and width
ratios of the image are not correct.
sp.95
• Image colors are not right
The whole image appears purplish or greenish, images are black
& white, or colors appear dull.
sp.96
• Images appear dark sp.97
Problems when projection starts
• The projector does not turn on sp.97
Other Problems
• No sound can be heard or the sound is faint sp.98
• The remote control does not work sp.98
• I want to change the language for messages and menus sp.99
• Email is not received even if a problem occurs in the projector
(EB-1775W/EB-1770W/EB-1760W only)
sp.99
Problem Solving
91
To Next Page
Loading...
Need help?
General
