Epson EB-1775W - Setting the Projector ID; Setting the Remote Control ID

Setting the Projector ID
a
Press the [Menu] button while projecting.
s
"Using the Configuration Menu" p.67
Using the remote control Using the control panel
b
Select Projector ID from Extended.
c
Choose the ID you want to set and press the [Enter] button.
d
Press the [Menu] button to finish making settings.
Setting the remote control ID
Set the ID on the remote control each time you switch the projector power
on. When the projector is powered on, the remote control ID is set to
"0" (that is, you can operate the projector with the remote control regardless
of the projector ID).
Projection Functions
57