Basic menu
Submenu Function
Projector Name
Displays the projector name used to identify the projector when
connected to a network.
When editing, you can enter up to 16 single-byte alphanumeric
characters.
PJLink Password
Set a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
Web Control
Password
Set a password to use when making settings and controlling the
projector using Web Control. Enter no more than eight single-
byte alphanumeric characters. Web Control is a function that
allows you to set up and control the projector by using the Web
browser on a computer connected on a network.
s "Changing Settings Using a Web Browser (Web Control)"
p.111
Submenu Function
Projector Key‐
word
When set to On, you have to enter the keyword when you try to
connect the projector to a computer via a network. As a result,
you can prevent presentations from being interrupted by
connections from other computers.
Normally this should be set to On.
s EasyMP Network Projection Operation Guide
List of Functions
78
To Next Page
Loading...
