a
Press the [Menu] button.
s "Using the Configuration Menu" p.67
b
Select Multi-screen from Extended.
c
Select the level to be corrected in Adjustment Level.
• Each time a level is selected, the pattern of the level selected is
displayed.
• You can start correcting from any level, usually you can make it
darker or lighter by correcting 1 to 5 or 5 to 1.
d
Correct the brightness with Brightness Correct.
• When you select Level 5, all the images are adjusted to the
darkest image from multiple projectors.
• When you select Level 1, all the images are adjusted to the
brightest image from multiple projectors.
• When you select Level 2 to Level 4, all the images are adjusted to
the mid-range brightness image from multiple projectors.
• Because each time the [Enter] button is pressed the image
displayed changes between the pattern display and the actual
image, you can check the correction results and make corrections
in the actual image.
e
Correct the Color Correct. (G/R) and Color Correct. (B/Y) settings.
f
Repeat procedures 3 to 5 until corrections are finished.
g
When all corrections are finished, press the [Menu] button to finish
making settings.
Projection Functions
59
To Next Page
Loading...
Need help?
General
