Submenu Function
Aspect
You can set the
aspect ratio
g
for projected images.
s "Changing the Aspect Ratio" p.40
Overscan
(This cannot be set when a digital RGB signal is input.)
Changes the output image ratio (the range of the projected
image). You can set the cropping range to Off, 4%, or 8%. When
the source is HDMI, Auto is available. When Auto is selected, it
automatically changes to Off or 8% according to the input signal.
However, this only occurs when the HDMI port of the connected
device is connected to the projector's HDMI port.
Reset
You can reset all adjustment values on the Signal menu to their
default settings, except for Input Signal.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.84
List of Functions
72
To Next Page
Loading...
Need help?
General
