Interacting with the Screen
106
Control commands Connection method
ESC/P-R Over a network
ESC/Page, ESC/Page-Color
PCL6, PCL6 Mode 1, PCL6 Mode 2
* Not all printers are supported. For more details on supported models,
contact Epson for help.
a
Select the icon on the bottom toolbar.
The Print screen is displayed.
b
Specify the number of copies on the Print screen (up to 20 sheets).
c
Select Print.
Selecting Network Device Display
If you have connected devices to the projector via a network, you can select to
project an image from those devices.
You can select the image source from computers that are running Epson
iProjection (Windows/Mac), and smartphones or tablets that are running
Epson iProjection (iOS/Android).
a
You can select any connected network device for projection, even if the
user connected using the Epson iProjection software with the
moderator feature enabled. See the Epson iProjection Operation Guide
(Windows/Mac) for details about the moderator feature.
a
Select the icon on the bottom toolbar, and then select Participant
List from the image source list.
The user selection screen is displayed.
b
Select the user name for the device you want to project from.
A
Displays the user names for network devices connected to the projector.
When displaying thumbnails, each device screen is displayed as a
thumbnail.
The icon is shown next to the user name of the currently projected
device.
B
Closes the user selection screen and returns to the previous screen.
To Next Page
Loading...
Need help?
General
