Adjusting the Image Color
73
• To adjust the overall color brightness of the color, adjust the
Brightness setting.
h
Press [Menu] or [Esc] to exit the menus.
Adjusting the Gamma
You can correct differences in projected image colors that occur between
different image sources by adjusting the Gamma setting.
a
Turn on the projector and switch to the image source you want to use.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Image menu and press [Enter].
d
Select Advanced and press [Enter].
e
Select Gamma and press [Enter].
f
Select and adjust the correction value.
When you select a smaller value, you can reduce the overall brightness
of the image to make the image sharper. When you select a larger value,
To Next Page
Loading...
Need help?
General
