Epson EB-710Ui - Setting Projector Event Schedules

Setting Projector Event Schedules
176
You can schedule up to 30 events to occur automatically on your projector,
such as turning the projector on or off or switching the input source
(EB‑700U). The projector performs the selected events on the specified date
and time in the schedule you set up.
Warning
Do not place flammable objects in front of the lens. If you schedule the projector
to turn on automatically, flammable objects in front of the lens could catch on a
fire.
a
• If you set a Schedule Protection password, turn off your Schedule
Protection password first.
• Light Source Calibration does not start if the projector is used
continuously for more than 24 hours, or regularly turned off by
shutting off the power outlet. Set Light Source Calibration events to
occur only after 100 hours of usage.
a
Set the date and time in the Date & Time menu.
s Extended > Operation > Date & Time
b
Press the [Menu] button on the control panel or remote control.
c
Select the Extended menu and press [Enter].
d
Select Schedule Settings and press [Enter].
e
Select Schedule and press [Enter].
f
Select Add New and press [Enter].
g
Select the event details you want to perform.