Projector Parts and Functions
20
• "Projector Setup Settings - Extended Menu" p.189
• "Projecting Two Images Simultaneously" p.116
• "Using the Remote Control as a Wireless Mouse" p.127
• "Using the Remote Control as a Pointer" p.129
• "Projecting a PC Free Presentation" p.119
• "Using the Projector on a Network" p.147
Projector Parts - Interactive Pens
The interactive pens come with the EB‑710Ui only.
Hold the pen to turn it on automatically. Pens turn off automatically after 15
seconds when you put them down.
Name Function
A
Pen tip Replaceable soft pen tip.
If the soft tip is hard to use on a textured surface,
replace it with the hard tip.
Name Function
B
Battery indicator Press the button on the side of the pen to indicate the
remaining battery power.
• When the battery is charged, the indicator turns blue
until you release the button.
• When the battery is running low, the indicator
flashes blue until you release the button.
• Does not light when the battery is exhausted. Change
the battery.
C
Button When Pen Button Function is set to Eraser in the
projector's Extended menu, press the button to switch
the tip function between pen and eraser while drawing.
When Pen Button Function is set to Open Drawing
Toolbar, press the button to display the toolbar near
the pen tip.
When Pen Button Function is set to Clear Screen,
press the button to erase all the contents drawn on the
projected screen.
s Extended > Easy Interactive Function > General
> Advanced > Pen Button Function
Press the button to perform a right-click operation
while using the pen as a mouse.
D
Strap attachment
point
Allows you to attach a commercially available strap.
E
Battery cover Open this cover when replacing the battery.
gg Related Links
• "Replacing the Interactive Pen Tip" p.222
To Next Page
Loading...
Need help?
General
