Turning Off the Projector
47
Turn off the projector after use.
a
• Turn off this product when it is not in use to prolong the life of the
projector. Light source life varies depending on the mode selected,
environmental conditions, and usage. Brightness decreases over time.
• Automatic light source calibration starts periodically when you turn
off the projector.
However, this does not start automatically in the following situations:
• If you use the projector continuously for more than 24 hours
• If you regularly turn off the projector by shutting off the power
outlet
Schedule periodic Light Source Calibration events in the projector's
Extended menu (EB‑700U).
s Extended > Schedule Settings
• Since the projector supports the direct shutdown feature, it can be
turned off directly using the breaker.
a
Press the power button on the control panel or remote control.
The projector displays a shutdown confirmation screen.
b
Press the power button again. (To leave it on, press any other button.)
The projector beeps twice, the light source turns off, and the status
indicator turns off.
c
To transport or store the projector, make sure the power indicator is
blue (but not flashing) and the status indicator is off, then unplug the
power cord.
To Next Page
Loading...
Need help?
General
