Epson EB-710Ui User Manual

Projector Network Settings - Network Menu
199
s Network > Network Configuration > Wired LAN
Setting Options Description
IP Settings DHCP
IP Address
Subnet Mask
Gateway Address
DHCP: set to On if your network assigns
addresses automatically; set to Off to
manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each address
field.
Do not use these addresses: 0.0.0.0,
127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address and
Gateway Address and 255.255.255.255 or
0.0.0.0 through 254.255.255.255 for
Subnet Mask.
IP Address Display On
Off
Select whether to display the IP address
on the network standby screen.
Network Menu - Notifications Menu
Settings on the Notifications menu let you receive an email notification if a
problem or warning occurs in the projector.
s Network > Network Configuration > Notifications
Setting Options Description
Mail Notification On
Off
Set to On to send an email to the preset
addresses when a problem or warning
occurs with a projector.
SMTP Server IP address Enter the IP address for the projector's
SMTP server using 0 to 255 for each
address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Port Number 0 to 65535 (default
is 25)
Select a number for the SMTP server
Port Number.

Epson EB-710Ui Specifications

General

Brand	Epson
Model	EB-710Ui
Category	Projector
Language	English