Projector Setup Settings - ECO Menu
203
Setting Options Description
A/V Mute Timer On
Off
Automatically turns off the projector
after 30 minutes if A/V Mute is enabled
(when On).
Standby Mode Available when you have set A/V Output
to While Projecting.
Standby Mode Communication On indicates that the
projector can be monitored over a
network when the projector is in standby
mode. Enable this setting to allow the
following operations to occur when the
projector is in standby mode:
• Monitor and control the projector over
a network
Port Selects the port to use from Wired LAN
or Wireless LAN while the Standby
Mode setting is set to Communication
On.
ECO Display On
Off
Displays a leaf icon in the bottom left
corner of the projected screen to indicate
the power-saving status when the light
source brightness changes (when On).
Reset — Resets all adjustment values on the ECO
menu to their default settings, except for
Standby Mode.
* Available only for EB‑710Ui.
a
• When the Sleep Mode Timer setting is enabled, and if there is no
signal input for a certain period of time, the light source dims before
the projector turns off.
gg Related Links
• "Projector Setup Settings - Extended Menu" p.189
To Next Page
Loading...
