EasyManuals Logo

Epson EB-710Ui User Manual

Epson EB-710Ui
264 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #227 background imageLoading...
Page #227 background image
Projector Indicator Status
227
Indicator and status Problem and solutions
Power: Off
Status: Flashing blue
Laser: Off
Temp: Lit orange
Projector has overheated and turned off. Leave it turned
off to cool down for 5 minutes.
• Make sure that the vents and air filter are not clogged
with dust or obstructed by nearby objects.
• Clean or replace the air filter.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Extended menu.
s Extended > Operation > High Altitude Mode
• If the problem persists, unplug the projector and
contact Epson for help.
Power: Flashing blue
Status: Indicator status
varies
Laser: Flashing orange
Temp: Indicator status
varies
Laser warning.
Turn the projector off, unplug it, and contact Epson for
help.
Power: Off
Status: Flashing blue
Laser: Lit orange
Temp: Off
Laser has a problem.
• Make sure that the vents and air filter are not clogged
with dust or obstructed by nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug the projector and
contact Epson for help.
Power: Off
Status: Flashing blue
Laser: Off
Temp: Flashing orange
A fan or sensor has a problem. Turn the projector off,
unplug it, and contact Epson for help.
Power: Off
Status: Flashing blue
Laser: Flashing orange
Temp: Off
Internal projector error. Turn the projector off, unplug
it, and contact Epson for help.
Indicator and status Problem and solutions
Power: Flashing blue
Status: Indicator status
varies
Laser: Flashing orange
Temp: Flashing orange
Obstacle detection warning. A beep sounds, and the
message "For safety purposes remove any obstacles
blocking the lens." is displayed.
• Make sure that there are no obstacles interfering with
the projection window. Remove any obstacles.
• Clean the obstacle sensor if there are no obstacles.
The projector turns off automatically if no action is
taken.
Power: Off
Status: Flashing blue
Laser: Lit orange
Temp: Lit orange
Obstacle detection error. Turn the projector off, unplug
it, and contact Epson for help.
gg Related Links
• "Cleaning the Air Filter" p.216
• "Replacing the Air Filter" p.218

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-710Ui and is the answer not in the manual?

Epson EB-710Ui Specifications

General IconGeneral
BrandEpson
ModelEB-710Ui
CategoryProjector
LanguageEnglish

Related product manuals