Image Shape
63
b
Hold down the [Num] button on the remote control, and then press
the numeric button (1, 2, or 3) that matches the number of the saved
setting.
a
The illustration above is only an example.
c
When you have finished loading the settings, follow the on-screen
instructions.
a
• You can also load the settings from Load Memory in the projector's
Settings menu.
• When an MHL compatible mobile device is connected to the
projector, load the settings from Load Memory in the projector's
Settings menu.
s Settings > Geometry Correction > Arc Correction > Load
Memory
To Next Page
Loading...
