If you place dierent sized originals in the ADF, all of the originals are sent at the largest size among them. To send
originals at their original sizes, do not place originals with mixed sizes.
1.
Place the
rst
batch of originals at the same size.
2.
Select Fax on the home screen.
3.
Specify the recipient.
4.
Select the Fax Settings tab, and then tap Continuous Scan(ADF) to set this to On.
You can also make settings such as the resolution and the sending method as necessary.
5.
Tap
x
(Send).
6.
When scanning the
rst
set of originals is complete and a message is displayed on the control panel asking you
to scan the next set of originals, set the next originals, and then select Start Scanning.
Note:
If you leave the printer untouched for the time set in Wait Time for Next Original aer you have been prompted to set
the next originals, the printer stops storing and starts sending the document.
Sending a Fax with a Subaddress(SUB) and Password(SID)
You can send faxes to the condential boxes or the relay boxes in the recipient's fax machine when the recipient's
fax machine has the feature to receive
condential
faxes or relay faxes.
e
recipients can receive them securely, or
can forward them to specied fax destinations.
1.
Place the originals.
2.
Select Fax on the home screen.
3.
Select Contacts and select a recipient with a registered subaddress and password.
You can also select the recipient from Recent if it was sent with a subaddress and password.
4.
Select the Fax Settings tab, and then make settings such as the resolution and the sending method as
necessary.
5.
Send the fax.
Related Information
& “Making Contacts Available” on page 371
Sending the Same Documents Multiple Times
Related Information
& “Storing a Fax Without Specifying a Recipient (Store Fax Data)” on page 118
& “Sending Faxes Using the Stored Document Feature” on page 118
Faxing
>
Sending Faxes Using the Printer
>
Various Ways of Sending Faxes
117
To Next Page
Loading...
Need help?
General
