Epson Expression 1680 Setup Guide

2
Setting Up the Scanner
2-7
R4C6740
Setup Guide Rev. C
SETUP.FM A5 size
10/26/00
R
Proof Sign-off:
K.Pipa
J.Miyakoshi
K.Norum
Connecting the Scanner Using the SCSI
Interface
For instructions on connecting the scanner to your computer
using the SCSI interface, read this section.
Note for Macintosh
®
users:
You need to install the scanner software before connecting the scanner
to your computer. Follow the instructions in Chapter 3 to install your
software, then connect your scanner as described in this chapter.
For PC users:
Unless your PC already has a SCSI board installed, you need to
install one, along with SCSI driver software. Install the SCSI board
according to the directions included with it. Also see “Installing
a SCSI interface board” on page 2-8.
Note:
You will also need to install the SCSI driver that is normally included
with Windows (see your Windows documentation for instructions), or
the driver described in your SCSI board installation documentation.
If your PC has a SCSI board up and running, connect the scanner
as described in “Connecting the scanner” on page 2-13.
For Macintosh users:
Your Macintosh may or may not have SCSI ports, depending on
which model you own. See the next section if you need to install
a SCSI board in your Macintosh. If your Macintosh already has a
SCSI port, install the scanner software as described in Chapter 3,
then connect the scanner to your Macintosh as described in
“Connecting the scanner” on page 2-13.
Note:
The latest driver may be available for download from the Web site of the
SCSI board manufacturer.

Epson Expression 1680 Specifications

Scanning Specifications

optical resolution	1600 x 3200 dpi
maximum resolution	13, 600 x 18, 720 dpi with interpolation
effective pixels	13, 600 x 18, 720 pixels (1600 dpi)
color depth	48 bits per pixel internal/external
grayscale depth	16 bits per pixel internal/external
scanning speed (color, 1600 dpi, draft mode)	9.2 msec/line (approx.)
scanning speed (grayscale/monochrome, 1600 dpi, draft mode)	3.1 msec/line (approx.)

Operating Environment

temperature operating range	41ºF to 95ºF (5ºC to 35ºC)
humidity operating range	10% to 80% (no condensation)
humidity storage range	10% to 85% (no condensation)

Power

voltage	AC 100V-120V, 220V-240V
frequency	50-60Hz
power consumption (operating without optional unit)	60W
power consumption (operating with optional unit)	75W
power consumption (standby without optional unit)	10W

Weight and Dimensions

maximum read area	8.5" x 11.7" (216mm x 297mm)
width	13.1" (332mm)
depth	22.1" (562mm)
height	5.2" (133mm)
weight	18.7 lb (8.5 kg approx.)