3-44
Installing the Software
R4C6740
Setup Guide Rev. C
INSTALL.FM A5 size
10/26/00
L
Proof Sign-off:
K.Pipa
J.Miyakoshi
K.Norum
8. To test the status of the scanner, click Test.
After the test is complete, information about the scanner's
status is displayed below the heading Scanner Status.
9. After setting this dialog box, click OK.
Installation of EPSON TWAIN Pro Network is complete.
Selecting Scanners
If you connect several scanners that are supported by EPSON
TWAIN Pro to your computer, follow the instructions below to
select which scanner to use.
Note:
You can only use more than one scanner of the same model if you connect
them using a different type of interface.
For Windows Millennium Edition, 98, and 2000
users
Note:
The illustrations in this section are of Windows 98. The screens in other
versions of Windows may vary slightly.
To Next Page
Loading...
