EasyManuals Logo
Home>Epson>Scanner>Expression 1680

Epson Expression 1680 Setup Guide

Epson Expression 1680
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
2-8
Setting Up the Scanner
R4C6740
Setup Guide Rev. C
SETUP.FM A5 size
10/26/00
L
Proof Sign-off:
K.Pipa
J.Miyakoshi
K.Norum
Installing a SCSI interface board
Follow the instructions in this section to install a SCSI board and
SCSI software in your computer. You should do this before
installing the scanner driver and software applications.
If you already have a SCSI board installed in your PC or
Macintosh, go to the next section.
Note:
For additional information, see the installation guide that comes with
your SCSI board.
1. Turn off the computer and any peripheral devices. Unplug
any power cords, then disconnect all cables from your
computer.
2. Remove the cover from your computer.
c
Caution:
Static electricity can damage electronic components.
Discharge static electricity by touching the metal frame of
your computer before handling the interface board or any of
the computer’s circuit boards.
3. Insert the interface board into an appropriate expansion slot,
then secure it with the retaining screw.
4. Replace the computer cover and reconnect all cables.

Table of Contents

Other manuals for Epson Expression 1680

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson Expression 1680 and is the answer not in the manual?

Epson Expression 1680 Specifications

Scanning Specifications IconScanning Specifications
optical resolution1600 x 3200 dpi
maximum resolution13, 600 x 18, 720 dpi with interpolation
effective pixels13, 600 x 18, 720 pixels (1600 dpi)
color depth48 bits per pixel internal/external
grayscale depth16 bits per pixel internal/external
scanning speed (color, 1600 dpi, draft mode)9.2 msec/line (approx.)
scanning speed (grayscale/monochrome, 1600 dpi, draft mode)3.1 msec/line (approx.)
Operating Environment IconOperating Environment
temperature operating range41ºF to 95ºF (5ºC to 35ºC)
humidity operating range10% to 80% (no condensation)
humidity storage range10% to 85% (no condensation)
Power IconPower
voltageAC 100V-120V, 220V-240V
frequency50-60Hz
power consumption (operating without optional unit)60W
power consumption (operating with optional unit)75W
power consumption (standby without optional unit)10W
Weight and Dimensions IconWeight and Dimensions
maximum read area8.5" x 11.7" (216mm x 297mm)
width13.1" (332mm)
depth22.1" (562mm)
height5.2" (133mm)
weight18.7 lb (8.5 kg approx.)

Related product manuals