3-24
Installing the Software
R4C6740
Setup Guide Rev. C
INSTALL.FM A5 size
10/26/00
L
Proof Sign-off:
K.Pipa
J.Miyakoshi
K.Norum
9. Make sure that SCSI is selected and your EPSON scanner
appears in the Scanner Selection list. If not, see “Software
Setup Problems” in the Maintenance and Troubleshooting
section of the online Reference Guide.
10. Click Test to check the connection. If everything is properly
installed and connected, Status: Device Ready appears
under Scanner Information in the dialog box
.
If Device Ready does not appear, see ”Software Setup
Problems” in the Maintenance and Troubleshooting section
of the online Reference Guide.
11. Click OK to close the EPSON TWAIN Pro dialog box.
To Next Page
Loading...
