3-26
Installing the Software
R4C6740
Setup Guide Rev. C
INSTALL.FM A5 size
10/26/00
L
Proof Sign-off:
K.Pipa
J.Miyakoshi
K.Norum
5. In the Installer dialog box, click Install and follow the
instructions on the screen.
6. When installation is finished, click Restart to restart your
computer, then proceed to step 7 to install other software.
7. Double-click the folder that contains the software you want
to install, then double-click the folder of your preferred
language.
Note:
To take advantage of all the functions of your scanner’s
a
Start
button, be sure to install Presto! PageManager for EPSON.
8. Double-click the installer icon to start the installation
program. Then follow the instructions on the screen.
9. After installing the software, connect the scanner to your
computer as described in Chapter 2. (Keep in mind the
“Power-on sequence” on page 2-14 if you are using a SCSI
interface.)
To Next Page
Loading...
