Epson LS11000 User Manual

105
Setting Options Description
Standby Mode Communication On
Communication Off
Enable this setting to allow
monitoring and control of the
projector over a network when
the projector is in standby mode
Indicators On
Off
Enables or disables the status
indicator lights on the projector
Trigger Out On
Off
Outputs a DC 12V signal at 200
mA maximum from the Trigger
Out port whenever the projector
is turned on
Inv Direction Button On
Off
Inverts the direction of the arrow
buttons on the control panel to
match the projector's installation
position
Reset Operation Settings — Reset all settings on the
Operation menu to their default
values
Parent topic: Adjusting the Menu Settings
Related references
Image Quality Settings - Image Menu

Epson LS11000 Specifications

General

Resolution	4K PRO-UHD (3840 x 2160)
Light Source	Laser
HDR Support	HDR10, HLG
Projection System	3LCD
Throw Ratio	1.35 - 2.84:1
3D Support	Yes
Brightness	2500 lumens
Contrast Ratio	1, 200, 000:1
Light Source Life	20, 000 hours
Zoom	2.1x
Input Lag	20 ms
Connectivity	HDMI, USB, Ethernet, RS-232C
Dimensions	520‎ x 442 x 193 mm (Width x Depth x Height)