55
3. Press the Color Mode button on the remote control.
A list of available Color Modes appears.
4. Select the color mode you want and press Enter.
5. Press Menu or Esc to exit the menus.
Parent topic: Color Mode
Available Color Modes
You can set the projector to use these Color Modes, depending on the input source you are using:
Color Mode Description
Dynamic Best for prioritizing brightness
Vivid Best for projecting in a bright environment
Bright Cinema Best for projecting movies in a bright environment
Cinema Best for projecting movies in a dark environment
Natural Best for adjusting the image color
Parent topic: Color Mode
Adjusting Image Sharpness
You can adjust the outline of an image by adjusting its sharpness.
1. Turn on the projector and display an image.
2. Press the Menu button.
To Next Page
Loading...
