Epson LS11000 User Manual

122
7. Replace the air filter cover and tighten the screws as shown.
Parent topic: Air Filter and Vent Maintenance
Related references
Optional Equipment and Replacement Parts
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
1. Remove the battery cover as shown.

Epson LS11000 Specifications

General

Resolution	4K PRO-UHD (3840 x 2160)
Light Source	Laser
HDR Support	HDR10, HLG
Projection System	3LCD
Throw Ratio	1.35 - 2.84:1
3D Support	Yes
Brightness	2500 lumens
Contrast Ratio	1, 200, 000:1
Light Source Life	20, 000 hours
Zoom	2.1x
Input Lag	20 ms
Connectivity	HDMI, USB, Ethernet, RS-232C
Dimensions	520‎ x 442 x 193 mm (Width x Depth x Height)