Name: Epson LS11000
Brand: Epson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Connecting to an HDMI Video Source

If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable.

The HDMI connection provides the best image quality.

Caution: Do not turn on the video source before connecting it to the projector. Doing so could damage

the projector.

Note: When projecting images at 4K 120Hz, use an HDMI 2.1 rated cable (ultra-high speed). If you use

an incompatible cable, images may not be displayed correctly. You can try correcting the images by

changing the EDID Mode setting in the projector's Signal I/O menu.

1. Connect the HDMI cable to your video source's HDMI output port.

2. Connect the other end to one of the projector's HDMI ports. If you are connecting an optical HDMI

cable, you must also connect the cable's USB power connector to the Opt.HDMI (300mA) port.

Note: When an audio/video source that meets the HDMI CEC standard is connected to the projector's

HDMI port, you can use the projector's remote control to control certain features of the linked device by

pressing the HDMI Link button on the remote control and setting HDMI Link to On.

Parent topic: Projector Connections

Connecting to a Computer for HDMI Video

If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable.

Other manuals for Epson LS11000

Questions and Answers:

Need help?

Do you have a question about the Epson LS11000 and is the answer not in the manual?

General