84
• Load Memory: overwrites your current settings with saved settings
• Erase Memory: erases the selected memory settings
• Rename Memory: renames a saved memory
• Reset: resets the name and settings of a saved memory
5. Press Menu or Esc to exit the menus.
Parent topic: Adjusting Projector Features
Related references
Image Quality Memory Settings - Memory Menu
Copying Menu Settings Between Projectors
After you select menu settings for your projector, you can transfer them to another projector of the same
model.
Note: Copy the projector's settings before you adjust the projected image using the projector's image
adjustment settings.
Caution: If the copy process fails due to a power failure, communication error, or for any other reason,
Epson will not be responsible for any repair costs incurred.
The following settings will not transfer between projectors if you set the Batch Setup Range setting to
Limited:
• EDID in the Signal I/O menu
• Network menu settings
Saving Settings to a USB Flash Drive
Transferring Settings from a USB Flash Drive
Saving Settings to a Computer
Transferring Settings from a Computer
Parent topic: Adjusting Projector Features
Saving Settings to a USB Flash Drive
You can save the projector settings you want to transfer to a USB flash drive.
To Next Page
Loading...
Need help?
General
