83
3. Select one of the following options:
• Image: saves your current Image menu settings for each color mode for the projected image (up
to 10 memories)
• Lens Position: saves your current focus, zoom, and lens shift settings (up to 10 memories); load
the saved settings by pressing the Lens1 or Lens2 button on the remote control
Note: Some slight adjustments may be needed after switching to a different lens position memory.
Note: To clear all saved memories, select Reset Memory Settings.
4. Select one of the following options:
• Save Memory: saves your current settings to memory (10 memories with different names are
available)
Note: A memory name that has already been used is indicated by a blue mark. Saving over a
previously saved memory overwrites the settings with your current settings.
To Next Page
Loading...
