Epson LS11000 User Manual

123
2. Remove the old batteries.
Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on
your hands. If it gets on your hands, wash them immediately to avoid injury.
3. Insert the batteries with the + and – ends facing as shown.
Warning: Make sure the batteries are inserted in the correct positions. If the batteries are not
inserted correctly, they could explode or leak, causing a fire, injury, or damage to the product.
4. Replace the battery cover and press it down until it clicks into place.

Epson LS11000 Specifications

General

Resolution	4K PRO-UHD (3840 x 2160)
Light Source	Laser
HDR Support	HDR10, HLG
Projection System	3LCD
Throw Ratio	1.35 - 2.84:1
3D Support	Yes
Brightness	2500 lumens
Contrast Ratio	1, 200, 000:1
Light Source Life	20, 000 hours
Zoom	2.1x
Input Lag	20 ms
Connectivity	HDMI, USB, Ethernet, RS-232C
Dimensions	520‎ x 442 x 193 mm (Width x Depth x Height)