Epson LS20-B Series

Maintenance 4. Cable
LS20-B Rev.4 81
(10)
As with the wire tie cut off at the removal step (14), bind
the cables with a new wire tie.
Wrap the cables in the silicon sheet for protection.
Bind the cables with the clip
band and the saddle.
(11)
Mount the Connector Plate.
For the details, refer to Maintenance: 3.4 Connector Plate.
(12)
Place and secure the Arm Top Cover without the cables being stuck.
For details, refer to Maintenance: 3.1 Arm Top Cover.