Epson LX 300+II User Manual

108 Troubleshooting
When you use side-crimped
multipart forms, the copies
may not align with the
original.
Raise the paper guide to keep the
printing position accurate.
The paper does not eject properly.
Cause What to do
The page may be too long. Tear off the fresh supply of paper and
eject the page from the printer. Use only
paper that is within the specified length
range described under “Printer
Specifications” on page 141.
When you switch between single sheets and continuous paper,
the beeper sounds three times and the PAUSE light comes on.
Cause What to do
You may have tried to change
the paper release lever
position while paper remained
in the printer.
Return the paper release lever to the
previous position and eject the paper.
Then change the paper release lever
position.

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)