Epson LX 300+II User Manual

110 Troubleshooting
You may have forgotten to fan
the stack of paper before
loading it into the bin.
Remove the paper and fan it.
The paper feed is crooked.
Cause What to do
The paper may be old or
creased.
Use only new, clean sheets of paper.
There may be too much paper
in the stacker.
Remove some sheets.
The right and left paper guides
are too far apart.
Position the paper guides to match the
width of your paper.
You may not be using the right
type of paper for the cut-sheet
feeder. For example, your
paper may be too heavy or too
light.
Make sure your paper meets the
requirements of your printer and
cut-sheet feeder. See “Paper” on page
146 for information on the paper
specifications.
One page of printing has spread to two pages.
Cause What to do
Your application software
settings may be incorrect.
Check that the page-length setting and
lines-per-page setting in your
application software are correct.

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)