Epson LX 300+II User Manual

86 Control Panel
3. LF/FF button**
❏ Feeds paper line by line when pressed and released.
❏ Ejects a single sheet or advances continuous paper to the
next top-of-form position when held down.
4. Load/Eject button**
❏ Loads a single sheet of paper.
❏ Ejects a single sheet of paper if a sheet is loaded.
❏ Loads continuous paper from the standby position.
❏ Feeds continuous paper backwards to the standby
position.
5. Pause button
Stops printing temporarily, and resumes printing when
pressed again. When pressed for three seconds, turns on the
Micro Adjust mode**. To turn off, press again.
6. Paper Out light
❏ On when no paper is loaded in the selected paper source
or when paper is not loaded correctly.
❏ Flashes when paper has not been fully ejected or a paper
jam has occurred.
7. Pause light
❏ On when the printer is paused.
❏ Flashes when the printer is in the Micro Adjust mode**.

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)