Epson Perfection4180 Photo - Page 76

EPSON Perfection4180 Photo Revision A
APPENDIX ADF; Disassembly 76
3. Remove the four screws (gold, P-TITE + flat washers), and remove the Motor/
Solenoid Assembly.
Figure 7-11. Removal of Motor/Solenoid Assembly
Figure 7-12. Removal of Motor/Solenoid Assembly
Figure 7-13. Installed Screws and Gear
C A U T I O N
When removing the screws shown in Figure 7-12, be careful since the
gear will pop out.
Remove one screw.
(Be careful as the gear, etc.
will pop out by removing this screw.)
Three screws
Installed on frame
shaft in this order.