182
Setting Options Description
HDBaseT Control Communications
Extron XTP
Selects the communication
settings for connections to an
HDBaseT transmitter or switcher
Control Communications:
enables or disables
communication from the Ethernet
and serial ports on the
transmitter; turning on this setting
disables the projector's LAN, RS-
232C, and Remote ports (Extron
XTP must be turned off to use
this setting)
Extron XTP: set to On when you
connect an Extron XTP
transmitter or switcher to the
HDBaseT ports
Multi-Projection Brightness Level
Edge Blending
Multi-screen
Projector ID
Select various options when
projecting from multiple
projectors
Brightness Level: adjusts the
brightness of the lamp; Power
Consumption in the Settings
menu must be set to Normal to
use this setting
Edge Blending: blends the
border between multiple images
to create a seamless screen
Multi-screen: adjusts the tint and
brightness of each projected
image
Projector ID: sets the projector
to a particular ID number which
allows you to use a remote
control to individually control
projectors
To Next Page
Loading...
Need help?
General
