185
Setting Options Description
Indicators — Select Off to turn off projector
indications, except warning
indicators
Instant Off — Select Enabled to place the
projector into standby status after
power off or Disabled to send
the projector into standby status
approximately 3 minutes after
power off
Inv Direction Button — Enable this setting if you installed
the projector on a ceiling and
want to invert the arrow buttons
on the control panel
Lens Type Various lens model numbers Select the model number for the
attached lens
Date & Time — Adjusts the projector's system
time and date settings
Lens Calibration — Display information about the
lens currently in use
Parent topic: Adjusting the Menu Settings
To Next Page
Loading...
Need help?
General
