Troubleshooting
119
2105 An error occurred in the paper feeding unit.
Reload the paper.
Click [OK] after loading the paper.
Reload the paper, and then click OK.
U “When the Paper Jams” on page
128
2108 The front roll paper is not loaded correctly.
Check the position of the paper width guide and reload the
paper.
Click [OK] after loading the paper.
Check the position of the paper width
guides, reload the paper, and then
click OK.
U “Replacing Paper” on page 32
2109 The rear roll paper is not loaded correctly.
Check the position of the paper width guide and reload the
paper.
Click [OK] after loading the paper.
2111 The front roll is out of paper.
Remove the paper from the tray.
Load new paper then click [OK], or click [Force] if the forced
print operation is needed.
Load new paper, and close the cover.
If an error is displayed on the Client
PC, click OK.
Click Force if the forced print
operation is needed.
U “Replacing Paper” on page 32
2112 The rear roll is out of paper.
Remove the paper from the tray.
Load new paper then click [OK], or click [Force] if the forced
print operation is needed.
2114 Paper is out or not loaded correctly.
Load paper: Width = xxxxmm, Type = xxxx, and then click [OK].
Load new paper, and then click OK.
U “Replacing Paper” on page 32
2115 The front roll is out of paper or not loaded correctly.
Load paper: Width = xxxxmm, Type = xxxx, and then click [OK].
2116 The rear roll is out of paper or not loaded correctly.
Load paper: Width = xxxxmm, Type = xxxx, and then click [OK].
Error ID Message What to do
To Next Page
Loading...
Need help?
General
