Epson Stylus Photo 1390 - Page 134

EPSON Stylus Photo 1390/1400/1410 Revision B
ADJUSTMENT Adjustment Items and Overview 134
Table 5-2. Maintenance Functions
Function Item Purpose Method Outline
Ink Charge This function is used for Printhead replacement to drain Shipping
Liquid of the after-sales service part in the head flow path and
simultaneously fill ink in the head flow path to make all nozzles
printable and stabilize the ink in the Printhead.
1. Select this function in the Adjustment Program.
2. Transfer the factory-set command (CL execution command (Initial Ink Charge) is used as the
command) to the printer to make the printer perform Initial Ink Charge operation.
Refurbishment Function
(Shipping Liquid
replacement)
This function is used to refurbish the initially returned product.
Specifically, clean the inside of the Head, and charge and replace
the Shipping Liquid.
1. Select this function in the Adjustment Program.
Cleaning This function is used to execute cleaning 3 (CL3) when ink is not
delivered from the Printhead properly, e.g. dot missing or skewed
injection.
1. Select this function in the Adjustment Program.
2. Execute CL3.
Waste Ink Counter Reset This function is used to read and reset the Waste Ink Counters. 1. In the Adjustment Program, select data read or reset from this function.
Before executing this function, replace the Waste Ink Pads on both the 0 digit and 130 digit side.