Epson Stylus Photo 1390 - Page 51

EPSON Stylus Photo 1390/1400/1410 Revision B
TROUBLESHOOTING Overview 51
At power-on After the Carriage has detected
the HP, an error is displayed on
the LED and STM3.
CSIC FFC 1. Check that the CSIC FFC is connected to the CSIC Board
Connector and Main Board Connector CN15.
1. Connect the CSIC FFC to the CSIC Board
Connector and Main Board Connector CN15.
2. Check the CSIC FFC for damage. 2. Replace the CSIC FFC with a new one.
CSIC Board 1. Check the CSIC Board for damage. 1. Replace the CSIC Board with a new one.
Carriage Unit 1. Check that the electrodes on the CSIC Board, which make
contact with the Ink Cartridge are not bent.
1. Replace the Carriage Unit with a new one.
Table 3-9. Troubleshooting of No Ink Cartridge/CSIC Error
Occurrence
Timing
Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
CN15
CSIC Board
Connector
CSIC FFC
CSIC Board
Electrode