Epson Stylus Photo 1390 - Page 79

EPSON Stylus Photo 1390/1400/1410 Revision B
DISASSEMBLY AND ASSEMBLY Disassembly/Assembly Procedures 79
4.2.1.3 Locking/Releasing the Carriage and Opening/Closing
the CD-R Unit
Locking/releasing the Carriage and opening/closing the CD-R Unit are mutually
related. The CD-R Unit cannot be opened when the Carriage Lock is released.
1. Remove the Right Side Housing. See section 4.2.1.2 on page 78.
2. Insert the flat-blade screwdriver into the hole on the right side of the frame, and
rotate the white shaft of the Ink System Unit.
Figure 4-10. Locking/Releasing the Carriage and Opening/Closing the CD-R Unit
C H E C K
P O I N T
If you are servicing Stylus Photo 1390, refer to this section only for
locking and releasing the Carriage. Stylus Photo 1390 does not have
the CD-R Unit.
Table 4-3. Relation between Carriage Lock and CD-R Unit
Direction of Rotation Carriage CD-R Unit
Clockwise (CW) Locked Can be opened/closed.
Counterclockwise (CCW) Released Locked
CCW
CW
White Shaft
C A U T I O N
When moving the Carriage Unit with the CD-R Unit opened, turn
the PG CAM (Right) beforehand so that PG ++ points downwards
to release the PG in order to prevent interference between the
Paper EJ Frame and Carriage Unit.
Figure 4-11. Interference between the Frame and Carriage Unit
PG Cam (Right)
Interference
point
Paper EJ Frame
PG ++ position
Carriage
Unit