108 Various Printing Options
8. Click Settings to adjust the way your poster will print. The
Poster Settings dialog box opens.
9. Make the following settings.
Note:
If you want to print only a few of the panels without printing the
entire poster, click the panels that you do not wish to print.
10. Click OK to close the Poster Settings dialog box.
After finishing all of the steps above, start printing.
Print Cutting
Guides
Select this check box to turn the cutting guide
options on.
Overlapping
Alignment Marks
Slightly overlaps the panels and prints alignment
markers so that the panels can be aligned more
precisely.
Trim Lines Prints border lines on the panels to guide you
when trimming the pages.
To Next Page
Loading...
