Epson Stylus Photo R2400 - How to make a poster from your printouts

Various Printing Options 111
2
2
2
2
2
2
2
2
2
2
2
2
Note:
If you want to print only a few of the panels without printing the
entire poster, click Panel Selection, click the panels that you do
not wish to print, then click OK.
11. Click OK to save the settings and close the Layout dialog box.
12. Click Print to start printing.
How to make a poster from your printouts
Here is an example of how to make a poster with 2x2 selected
under Poster Printing and Overlapping Alignment Marks
selected as the print cutting guide. Refer to the accompanying
illustrations as well.
Trim Lines Prints border lines on the panels to guide
you when trimming the pages.
Panel Selection Click the panels you do not need to print,
then click the OK button to print the
remaining panels.