How to Print 35
1
1
1
1
1
1
1
1
1
1
1
1
Note:
This screen shot appears when A4 (roll paper) is selected as the paper
size.
14. Cut the roll paper.
“Cutting the roll paper” on page 364
Note:
Wait until the printer stops printing and feeding paper. Cut off the
paper at the back of the printer, and then turn off the printer. The
remaining paper is ejected.
Driver settings for Mac OS 9
Note:
❏ You can change the margins for roll paper with the printer driver
settings. Refer to the section below to print without margins on
either side of your printout.
& See “Borderless Printing” on page 66
❏ In this section you will learn how to print a banner on roll paper
with margins on both sides of your printout.
1. Open the file you want to print.
2. Access the Page Setup dialog box.
“Accessing the printer software for Mac OS 9” on page 368
3. Select the appropriate Paper Size setting.
4. Select Roll Paper as the Paper Source setting.
5. Select Portrait (tall) or Landscape (wide) to change the
orientation of your printout.
6. Make appropriate Roll Paper Option settings.
To Next Page
Loading...
