36 How to Print
Selecting Banner means you can print data as a banner. This
allows you to print long documents as a continuous sheet
rather than as individual sheets.
Selecting Cut sheet means you can print standard-sized data.
This allows you to print documents as individual sheets
rather than as a continuous sheet.
7. Click OK to save your settings and close the Page Setup dialog
box.
Note:
Do not select Auto Sheet Feeder as the Paper Source setting
when roll paper is loaded in the rear manual feed slot. Doing so
causes unnecessary paper to feed after each document. If you have
already started printing, cancel printing from the printer software.
& See “Canceling Printing” on page 296
8. Access the Print dialog box.
“Accessing the printer software for Mac OS 9” on page 368
9. Select the appropriate Media Type setting.
“Media type settings” on page 369
To Next Page
Loading...
