30 How to Print
Driver settings for Windows
Note:
❏ You can change the margins for roll paper with the printer driver
settings. Refer to the section below to print without margins on
either side of your printout.
& See “Borderless Printing” on page 66
❏ In this section you will learn how to print a banner on roll paper
with margins on both sides of your printout.
1. Open the file you want to print.
2. Access the printer driver.
“Accessing the printer software for Windows” on page 366
3. Click the Main tab, then make the Quality Option setting. See
the following section for details on the Quality Option
settings.
& See “Quality Option” on page 126
4. Select Roll as the Source setting.
5. Make appropriate Options settings in the Roll Paper Options
dialog box.
Selecting Banner Mode means you can print data as a
banner. This allows you to print long documents as a
continuous sheet rather than as individual sheets.
Selecting Cut Sheet Mode means you can print
standard-sized data. This allows you to print documents as
individual sheets rather than as a continuous sheet.
6. Click OK to return to the Main menu.
7. Select the appropriate Type setting.
“Media type settings” on page 369
To Next Page
Loading...
